9726-A35美國Cannon恒溫粘度水浴CT-2000 Constant Temperature Bath

微處理機控制ct - 2000系列恒溫浴適應粘度計管需要浴深度12”和提供可靠的溫度控制從10°C到150°C。該單元可容納7個同時粘度的測定。

精確和精確的溫度控制

溫度范圍:10°C到150°C

溫度精度:±0.01°C從10°C到100°C;從100°C±0.03°C到100°C

符合ASTM D445溫度敏感性要求的運動粘度測定

電機驅動攪拌器，確保浴溫均勻

微處理器控制的溫度調節和網絡能力

期望的浴溫和校準溫度被數字輸入在面板的鍵盤上

集成微處理器自動調節浴溫

目標和實際浴溫度監控的RTD溫度探測器,不斷顯示在°C或°F在液晶屏幕上

rs - 232和rs - 485通信端口提供數據采集和多單元聯網功能

9726-A35美國Cannon恒溫粘度水浴CT-2000 Constant Temperature Bath

For Kinematic Viscosity from 20 °C to 150 °C
ASTM D445/D446, ISO 3104/3105

The microprocessor-controlled CT-2000 series constant temperature bath accommodates viscometer tubes requiring a bath depth up to 12" and provides reliable temperature control from 10 °C to 150 °C. The unit accommodates up to 7 simultaneous viscosity determinations.

Precise and accurate temperature control

• Temperature range: 10 °C to 150 °C*
• Temperature accuracy: ± 0.01 °C from 10 °C to 100 °C; ± 0.03 °C from 100 °C to 150 °C
• Meets ASTM D445 temperature sensitivity requirements for kinematic viscosity determination
• Motor driven stirrer ensures a uniform bath temperature

Microprocessor-controlled temperature regulation & networking capabilities

• Desired bath temperature and calibration temperatures are digitally entered on the front panel keypad
• Integrated microprocessor automatically regulates bath temperature
• Both target and actual bath temperatures are monitored by an RTD temperature probe and continuously displayed in °C or °F on the LCD screen
• RS-232 and RS-485 communication ports provide data acquisition and multi-unit networking capabilities

Efficient, user-friendly design

• Seven glass viscometer ports (each 2” in diameter) and two thermometer ports (each 0.4” in diameter) allow up to 7 simultaneous viscosity determinations**
• Two electric heating elements quickly heat bath media to the selected temperature
• Stainless steel baffle provides a plain reflective viewing background
• Integrated stainless steel cooling coil allows connection to tap or recirculating water chiller for temperatures slightly above or below ambient. An external thermoelectric bath cooler is also available.
• Convenient drawer provides easy access to electrical controls
• Capable of using water or oil as bath medium

9726-A35 Constant Temperature Bath

Safe operation

• Bath thermistor senses over-temperature fault and removes power
• Thermistor disconnection results in removal of bath heater power
• Liquid level sensor prevents operation if bath liquid is not at a safe operating level

Reliable performance

• Well tested CANNON bath platform offers reliability and dependable support
• All wetted components are manufactured from high quality stainless steel or glass
• The heavy duty aluminum frame offers a corrosion-resistant epoxy finish

9726-A35 Constant Temperature Bath